McFarlane HDL-100-44 Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 55

McFarlane HDL-100-44 Series Скачать руководство пользователя страница 3

3

INTRODUCTION

Thank you for purchasing your new McFarlane transport cart and harrow sections. We know that
you will get many years of dependable service from this modernly designed unit.

You may have had a particular application in mind when you purchased this unit. There are
actually many uses for the McFarlane harrow including incorporation of herbicides and pesticides,
leveling and smoothing tilled soil, and covering of broadcast seeds. Contact your dealer if you
would like more information or have questions concerning these or other applications.

LIMITED WARRANTY

FULL ONE - YEAR WARRANTY OF

HDL-100 Series

If within one year from the date of purchase, this transport cart and/or its accompanying harrow
sections fail due to defect in material or workmanship, McFarlane Mfg. Co., Inc. will repair it, free
of charge.

Warranty service is available by simply contacting the nearest McFarlane dealership throughout
the United States or Canada.

This warranty applies only while this product is used in the United States or Canada.

This warranty gives you specific legal rights, and you may have other rights which vary from state
to state.

McFarlane Mfg. Co., Inc., Sauk City, Wisconsin 53583

«
1
2
3
4
5
...
»

Содержание HDL-100-44 Series
























































Отзывы:

Нет отзывов