42580101 3
2/17/09
No. 14 Pitbull Jaw Bushing Replacement Kit
A425801
Fig. 4
6. Repeat steps 2-5 for the other side of the jaw.
7. Assemble unit and check to ensure that the jaw slides on the guide rods with a
minimum amount of force required on the lever handle. Remove the movable jaw.
8. If necessary, ream the bushings using the supplied reamer (MJL00070). Otherwise
proceed directly to step 9.
9. Install the seals with the flat sides facing each other, as shown in Fig. 5. Use the jaw
seal installation tool (413006) as shown in Fig. 6.
425802
