McElroy DynaMc 250HP, Руководство оператора

Страница: 22 / 44

Butt Fusion Procedure
3 - 4
Facing the Pipe
Move facer into place
Turn on the facer.
Move the carriage control valve to the close carriage position.
Pump the handle to move the carriage to the left against the facer.
If the facer begins to stall, reduce the amount of pressure applied to the
handle.
Move the carriage until the facer bottoms out on facer stops.
Allow the facer to run for several revolutions to ensure that there
are no chips hanging to the end of the pipe.
Turn facer off.
TX02960-4-15-09
Loading Pipe Into Machine
Clean the inside and outside of pipe ends that are to be fused.
Open the upper jaws and insert pipe in each pair of jaws with
applicable inserts installed. Let the ends of the pipe protrude past
the face of the jaws .75" for 28 and 1.25" for 250 and 412.
TX02983-4-27-09
PH
03
86
2-
4-15-0
9
PH
03
90
9-
4-
27
-0
9
PH
03
881-
4-15-0
9
PH
0412
5-
4-12
-10