McDonald's C836 Скачать руководство пользователя страница 59

Страница: 59 / 68

Programming Optional Menu Items

Once the Control Menu passcode has

been entered, press the

key for

“MENU ITEMS”.

Use the

keys to scroll to

“ADD ITEM”. The following screen will
display.

ADD ITEM

Press the

key. The following screen

will display.

M M M M M M M M M M M M

ENTER ITEM NAME

Use the

key to change the

first default character into the first desired
character.

Move the cursor to the next digit by using

the

key.

Continue entering the appropriate
characters until the complete item name
has been entered.

Press the

key until any remaining

default characters are removed.

Press the

key. The screen will

display, “TYPE: CLAM”. Press the

key to select “CLAM” or “FLAT.”

Press the

key.

If “FLAT was selected, perform the
following procedures:

If “FLAT” was selected, the screen will
display “FUNCTIONS: 0”. The new flat
item can have a maximum of three
functions: Turn, Sear, and Turn/Sear.

Use the

key to scroll to the

appropriate number of functions and

press the

key. The screen will

display “FUNC1: TURN.”

Use the

key to scroll to the

desired function. Press the

key

to accept the selection.

Note:

For items with multiple

functions, repeat these steps until all
the functions have been entered.

After the

key has been pressed,

the screen will display, “AM __ PM

__”. Use the

keys to

scroll to the appropriate selection.

Press the

key. The screen will

display the first function and “000”.
(Example: TURN IN: 000.)

Press the

keys to

change the time in single increments.
The time can also be changed in
increments of 10's and 100's by
moving the cursor, per the following
procedure:

Press the

key to move the

cursor to the next digit. Change the

time, using the

keys.

Repeat this sequence for each digit
until the correct time is displayed.

Содержание C836





































































Результаты поиска

Содержание C836

Отзывы:

Похожие инструкции для C836

Бренды по названию

Популярные бренды

McDonald's C836, Руководство пользователя

Результаты поиска

Содержание C836

Отзывы:

Похожие инструкции для C836

Бренды по названию

Популярные бренды