McDonald's C836 Скачать руководство пользователя страница 54

Страница: 54 / 68

Note:

A network commissioning process tool

called the “wink” function can be initiated over
the existing user interface to identify a piece of
equipment. When the “wink” command is
received through the network for the grill, an
alarm will sound at maximum volume for two
seconds.

Date

From the SYSTEM SET UP menu, press

the

key until the screen displays

“DATE”.

DATE

FRI

03/20/09

Use the

key to place the cursor

under the digit to be changed (i.e.,
weekday, month, day, or year).

Use the

and

keys to change

the digit. Scroll to the next digit to be
adjusted and repeat these steps, until the
desired date has been entered.

Press the

key to accept the

selection.

Press the

key to return to the

AM/PM Mode.

Press the

key to exit the

programming mode, or wait for the display
to time out after 3-5 seconds.

Time

From the SYSTEM SET UP menu, press

the

key until the screen displays

“TIME”.

TIME

5:00 PM

To make an adjustment to the time, press

the

key to scroll to the digit to be

changed (i.e., hour, minute, or AM/PM).

Press the

and

keys to

increase or decrease the digit. Scroll to
the next digit to be adjusted and repeat
these steps, until the desired time has
been entered.

Press the

key to accept the

selection.

Press the

key to return to the

AM/PM Mode.

Press the

key to exit the

programming mode, or wait for the display
to time out after 3-5 seconds.

Содержание C836





































































Результаты поиска

Содержание C836

Отзывы:

Похожие инструкции для C836

Бренды по названию

Популярные бренды

McDonald's C836, Руководство пользователя

Результаты поиска

Содержание C836

Отзывы:

Похожие инструкции для C836

Бренды по названию

Популярные бренды