McDonald's C602, Руководство пользователя

Страница: 63 / 114

61
Important! Inspect to see that the spinner shaft seal is
correctly installed in the groove. A worn, missing, or
improperly installed spinner shaft seal will cause product
leakage out the top of the draw valve.
9. Lubricate the smaller end of the driven spinner.

(See Figure-118.)
Figure-118
10. Squeezing the split end together, insert the driven
spinner through the metal opening of the draw valve
until it snaps into place. (See Figure-119.)
Figure-119
11. Insert and align the draw valve spinner assembly into
the shake door as shown. (See Figure-120.)
Figure-120
12. Place the freezer door O-ring into the groove on the
back of the freezer door. Lubricate the outside
diameter of the front bearing. Slide the front bearing
into the door hub. (See Figure-121.)
Figure-121
Note: If necessary, put two small spots of lubricant at the
10 o'clock and 2 o'clock positions on the upper portion of
the freezer door O-ring to keep it in place.