B
SNMP Trap Registration Group
B-71
FC Management MIB
trapRegPort
Syntax
INTEGER (1..2147483647)
Access
read-only
Status
mandatory
Description
The UDP port to send traps to for this host. Normally this would be
the standard trap port (162). This object is an index and must be
specified to create a row in this table.
Sequence
::= { trapRegEntry 2 }
trapRegFilter
Syntax
FcEventSeverity
Access
read-write
Status
mandatory
Description
This value defines the trap severity filter for this trap host. The
connUnit will send traps to this host that have a severity level less
than or equal to this value. The default value of this object is
'warning'.
Sequence
::= { trapRegEntry 3}
trapRegRowState
Syntax
INTEGER {
Access
read-write
Status
mandatory
Description
Specifies the state of the row.
rowDestroy
READ: Can never happen.
WRITE: Remove this row from the table.
rowDestroy(1),
Remove row from table.
rowInactive(2),
Row exists, but TRAPs disabled
rowActive(3)
Row exists and is enabled for sending traps }
Содержание 316095-B21 - StorageWorks Edge Switch 2/24
