background image

2

Never breathe the exhaust fumes as they are poisonous. Never operate the engine in closed spaces.
If someone is exposed to the exhaust fumes, the person has to be taken out to open air in case of nausea.
Always store your fuel in a sealed container specifically made for gasoline.

Quick Guide for MCD Racing Cars

Warranty and safety precautions

With the purchase of this MCD 1:5 car,  your car is under two year warranty starting with the date of purchase. This warranty 
covers any material or manufacturing faults that might be present at the date of purchase.
This warranty does not cover:

Ordinary wear and tear.
Wearable parts like the clutch or gears.
Damages as a result of misuse by the driver.
Damages from wrong maintenance procedures .
Cosmetic damage.

 Please consult your local hobby shop first in case of a warranty claim.

 In case you decide to send this product for repair, please attach a proof of purchase. Before you send 
your product to your dealer, we recommend you to consult them first (either via telephone or email) 
The sender has to pay for shipping costs. Every warranty claim has to be validated by service department 
first. Dismissed claims are subject to administrative fees (checking and handling) before we send the items 
back. Repairs that are not covered by warranty have to be paid for in advance. MCD Racing cannot be held 
responsible for any damages that emerge from or are caused by, directly nor indirect use or misuse of this 
product or its accessories. 

 This product should not be considered as a toy and therefore not suitable for children under the age of 14. The engine 
must not be operated interiors.

IMPORTANT:

Advise your local hobby shop before you first start up the engine, especially considering proper operation 
and safety precautions. If possible, get a demonstration on how to operate the engine, and make yourself 
familiar with it. 

Only if and when you fully understand its operation, you should start using the engine. Always be sure to
operate within the safety guidelines indicated below to avoid damages or personal injury. Never try to
modify any part of the engine as this voids the warranty and may lead to damages or personal injury.

Fuel – Safety precautions

Use only minimum 95 Octane gasoline mixed with high quality two-cycle engine oil. Use a 20:1 ratio gasoline to oil. 

(e.g. 

250ml oil mixed with 5lt Fuel

)

Stay away from open fires while fuelling or running the engine. Do not smoke nearby!
Store the fuel in a well ventilated area, away from heat sources, fire or batteries. 

 Always keep the fuel in a clearly marked container away from the reach of children.

In case of eye contact, rinse thoroughly with warm water.
In case of skin contact, rinse thoroughly with warm water and soap. Do not scrub.

Never handle the engine or the exhaust until they are cooled down.  These parts can get up to 170°C when 

operating.

Содержание duox













Отзывы: