McCulloch MC1375-AU, Руководство пользователя, Страница: 7 / 13

12 | ENGLISH ENGLISH | 13
STEAM CLEANING ACCESSORIES
WARNING: Do not connect accessories while unit is emitting steam.
JET NOZZLE / SCRAPER / TRIANGLE BRUSH
1. Select one of the three accessories (Jet Nozzle shown as example) and push onto the Steam
Nozzle (A).
2. Rotate accessory until the yellow lock/release button snaps into the accessory hole (B).
NOTE: The Jet Nozzle, Scraper and Triangle Brush can be connected to the end of an
Extension Wand for reaching high or difficult spots. Connect the Extension Wand (or
Wands) as outlined on Page 8, then connect your desired accessory to the Wand in the
same way as you would normally connect to the Steam Nozzle.
UTILITY BRUSHES / ANGLED NOZZLE / SCRUB PAD
NOTE: Accessories connect to the Jet Nozzle, not the Steam Nozzle.
1. Firmly press accessories onto tip of Jet Nozzle. Press it on as far as possible to prevent
steam leakage.
2.
To remove accessories, simply grip it firmly and pull it off Jet Nozzle.
LARGE BRUSH
NOTE: Large Brush connects to the Triangle Brush, not the
Jet Nozzle.
1.
Place Large Brush over the Triangle Brush, and firmly press it on to
the Triangle Brush until it snaps into place.
2.
To remove Large Brush, simply grip it firmly and pull it off of the
Triangle Brush.
ORDERING ACCESSORIES & PARTS
Replacement accessories and parts for your Canister Steam System (model MC1375-AU)
may be ordered through our Website:
www.mccullochsteam.com.au
You may also contact Consumer Service directly:
info@mccullochsteam.com.au or 1800 099 012
Assembling Your Canister Steam
System Assembling Your Canister Steam
System
Steam Nozzle
B
A