McCulloch MC1375-AU, Руководство пользователя, Страница: 3 / 13

4 | ENGLISH ENGLISH | 5
outlets.
† Do not leave unit unattended while plugged in. Unplug the appliance
immediately after each use.
† Do not use unit where aerosol-based products are being used, or where
oxygen is being administered.
† Unit is only meant to be used with recommended accessories. Using
other types of attachments may cause damage to unit or injury.
† If Lighted On/Off Switch does not illuminate when set to “ON”
position while power cord is plugged in, unit is not operating normally.
Immediately disconnect cord from power supply, then refer to
troubleshooting guide of this manual for assistance.
† Always turn unit off and unplug power cord before filling with water OR
DOING MAINTENANCE WORK. Do not attempt to use unit without
properly filling.
† When filling, only water should be used in unit – other cleaning agents
could damage unit or cause injury. Distilled or de-mineralized water
is highly recommended, in order to minimize potential build-up of
mineral deposits. Do not overfill with more than recommended amount
of water.
† To avoid burns from escaping steam when removing cap to refill unit:
• Always allow unit to cool for 30 minutes.
• Press and hold Steam Button to release all remaining steam pressure.
• Do not open product to refill during use.
† To reduce risk of contact with hot water emitting from Main Nozzle,
check appliance before each use by positioning it away from body and
turning it on. Do not operate unit if Main Nozzle is blocked.
† Burns can occur from touching hot metal parts, hot water, or steam. Do
not touch Main Nozzle or attempt to connect accessories while unit
is in use. Do not touch bottom of Mop Head or attempt to attach a
Microfiber Pad by hand while unit is in use. Use caution when you turn
unit upside-down – there may be hot water.
WARNING: Danger of scalding. This location has hot steam, use
caution when handling.
† Use caution when using unit on uneven surfaces, such as stairs. Do not
place, set or store the product near water, such as a bathtub or sink.
Never immerse the product in liquids. Do not allow cord to touch hot
surfaces.
† When steaming any surface for the first time, it is recommended that
you consult the manufacturer’s guidelines for material being steamed.
For items in question, test on an inconspicuous area before proceeding.
† Steaming unsealed hardwood or unglazed ceramic surfaces is not
recommended, and may result in warping or damage to the surface.
Steam may remove the sheen from surfaces treated with wax.
† When steam mopping, never leave unit resting in one spot on any
surface for any period of time – prolonged exposure to heat and
moisture may damage floor surfaces.
† Do not allow power cord to touch hot surfaces during use. Bundle cord
loosely when storing.
† Always allow unit to cool (at least 30 minutes for complete cooling) and
empty before storing. Do not store unit with a damp Microfiber Pad still
attached.
† Do not open filling cap while in use. See refill instructions
† The steam must not be directed towards equipment containing
electrical components, such as the interior of ovens.
SAVE THESE INSTRUCTIONS