McCain ATC eX2 NEMA, Руководство пользователя

Страница: 24 / 89

18
A normal boot up sequence is as follows:
U-Boot 1.3.0-rc2 (Jan 16 2014 - 16:18:04) McCainEngineBoard
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c1, MPC8360E, Rev: 21 at 399.999 MHz, CSB: 266 MHz
Unit: McCain Engine Board III
I2C: ready
DRAM: 256 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Net: UEC: PHY is Generic MII (0)
UEC: PHY is Generic MII (0)
FSL UEC0, FSL UEC1
Hit any key to stop autoboot: 0
## Booting image at fe050000 ...
Image Name: mgr Image
Image Type: PowerPC Linux Kernel Image (uncompressed)
Data Size: 3495582 Bytes = 3.3 MB
Load Address: 00000000
Entry Point: 00010000
OK
Booting using the fdt at 0xfe040000
Loading Device Tree to 007fc000, end 007fefff ... OK
Using MPC836x MDS machine description
Linux version 2.6.22 (mguerrero@engdesign) (gcc version 4.0.2 20060628 (Wasabi)) #2
Fri Jul 10 13:01:41 PDT 2015
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
early_node_map[1] active PFN ranges
0: 0 -> 65536
Built 1 zonelists. Total pages: 65024
Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200
IPIC (128 IRQ sources) at fdefc700
QEIC (64 IRQ sources) at fdefb080
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256572k/262144k available (2564k kernel code, 5220k reserved, 120k data, 239k
bss, 124k init)
Calibrating delay loop...
132.60 BogoMIPS (lpj=66304)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)