MC Technologies MC PMRL Скачать руководство пользователя страница 26

Страница: 26 / 26

MC PMRL

Mobile Radio Router

MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany

Tel: +49 511 67 69 99-0, Website & Shop: www.mc-technologies.net, Email: [email protected]

13 Maintenance, repair and troubleshooting

13.1 Maintenance

The product is maintenance-free and requires no special regular maintenance.

13.2 Troubleshooting

If a fault occurs during operation of the product and you need assistance, please contact
MC Technologies support. You can reach our support department by e-mail at

[email protected]

13.3 Repair

Send defective products with a detailed error description to:

MC Technologies GmbH, Kabelkamp 2, 30179 Hannover

Before shipping the device:



Call our support team and ask for an RMA(Return to Manufacturer

Authorisation) number.



Remove possibly inserted SIM cards.



Back up the configurations on the device and any other data stored on it.



Back up any applications running on the device.

It is not permitted to open the product for repair work or modifications.

14 Disposal

14.1 Return of the old equipment

In accordance with WEEE regulations, the return and recycling of old MC Technologies
equipment for our customers is regulated as follows:

Please send your old devices carriage paid to the following address:

MC Technologies GmbH
-Entsorgung-
Kabelkamp 2
30179 Hannover

Содержание MC PMRL



























Результаты поиска

Содержание MC PMRL

Отзывы:

Похожие инструкции для MC PMRL

Бренды по названию

Популярные бренды

MC Technologies MC PMRL, Руководство пользователя

Результаты поиска

Содержание MC PMRL

Отзывы:

Похожие инструкции для MC PMRL

Бренды по названию

Популярные бренды