MC Electronic SAFETY-FLY 700 P, Руководство пользователя

Страница: 16 / 32

16
2.1 PROGRAMMING MOTOR AND FLAP ALARMS.
To start programming, press the red RESET button, and hold it down (for
approximately 4 seconds) to power the instrument, releasing the button when the
first red CHT indicator light (ref. B) turns on.
Programming will now begin in a cyclical semi-automatic mode, i.e. the pilot will
interact manually with the instruments for the movement phase.
Programming starts with calibrating the cylinder head temperature alarm indicator
light (CHT), followed by the motor oil temperature (OIL TEMP), Min and Max
motor oil pressure (OIL PRESS), and display of the FLAPS.
The start and end programming sequence is shown in the table below, with the
exception of fuel pressure calibration, which is carried out in a following step using a
different mode
, explained in chap. 2.2