MC Crypt CDMPX-20, Инструкция по эксплуатации

Страница: 38 / 89

38
10. Commissioning
f) Cueing
You can select the starting point for playback using the CUE-function. The start point is set automatically (AUTO
CUE).
The advantage of this function is that e.g. empty slots at the start of a track are not played back and that
there are therefore no breaks after starting the playback.
Auto CUE
• After pressing a track jump button (6, 16 or 17) or a keypad button (2), the device automatically sets the CUE point
in the position where the music starts.
Back CUE
• During playback, press the button CUE (10).
• The CD player returns to the start of the track and enters pause mode.
Checking the CUE-mark
• Press the CUE button (10).
• The device returns to the CUE point and goes into pause mode.
• Press and hold the CUE button (10).
• Playback starts from the CUE point as long as you keep the CUE (10) button depressed.
• After letting go, the CD player returns to the CUE mark and switches to the pause mode.
Deleting a CUE point
• The CUE-mark is deleted as soon as a new CUE mark is set.
g) LOOP-function (playback looping)
You can define a playback loop. The start and end point of the loop is set during playback.
• At the desired start point of the playback loop, press the button IN (8).
• At the desired end point of the playback loop, press the button OUT (18).
• The playback loop is now played back continuously until the button OUT (18) is pressed again.
• To call up a saved playback loop again, press the button RELOOP (9).
The existing playback loop is deleted when a new playback loop is programmed.