MC Crypt CDMPX-20, Инструкция по эксплуатации

Страница: 32 / 89

32
6. Connections and control elements
(8) IN button
The device lets you save a „seamless“ playback loop. For this purpose, the device features the button IN (8), the
button OUT (18) and the button RELOOP (9).
With the IN button, you program the starting point of the playback loop.
A detailed description of the „LOOP“ function can be found under „Loop function“ in one of the following
chapters in this manual.
(9) RELOOP button
With this button, you call up a saved playback loop once again.
A detailed description of the „LOOP“ function can be found under „Loop function“ in one of the following
chapters in this manual.
(10) CUE button
If the CUE button is pressed briefly during playback, the CD player returns to the start of the track and goes into
PAUSE mode. If you keep the CUE button depressed, playback starts from the CUE mark. After letting go of the
CUE button, the CD player returns to the CUE mark and goes into pause mode.
(11) PLAY/PAUSE button ||
Use this button to start or temporarily stop (pause) the CD playback. During playback, the button is permanently
lit, during pause mode, it blinks.
(12) LC display
The LC (liquid crystal) display shows the most important settings and the CD play data.
(13) TIME button
This button switches between the different playing times display options.
elapsed track time > remaining track time > total remaining CD playback time
When playing back MP3 files, the total remaining playing time of the CD is not displayed.
(14) PITCH BEND + button
With this button you can temporarily increase the playback speed of the CD.
(15) PITCH button
With this button, you turn the PITCH function for the PITCH slider (20) on/off.
(16) Track jump forward button |
With the track jump buttons, you can select any track on the CD. Press and hold the button to speed up the track
skip.