MBW MK8-75, Руководство по безопасности и обслуживанию оператора

Страница: 43 / 68

43 of 68
Check of petrol
level and supply
At each start
Par. 4.3.3.
!
CAUTION
Make sure that
the petrol contains no
water and do not use
mixtures or diesel.
Perform this operation in
a well ventilated
environment and away
from possible sources of
heat or flames. Make use
of specific P.P.E. (mask)
as shown in the residual
risks table on page 20 of
this publication.
REFER TO THE ENGINE
MANUAL
.
Machine
stopped/
Power
sources
disconnected
Engine oil level
check and
possible
replacement
Daily
Check the manufacturer's
instructions present in the
component’s
manual
(attached to this publication)
and in PAR. 6.2.5 of this
publication
Machine
stopped/
Power
sources
disconnected
Fork
replacement
If necessary (in
case of
breakage, see
table of
drawbacks This activity must be carried
out
exclusively by a
specialised operator
( RESELLER/AUTHORIZED
DEALER)
Machine
stopped/
Power
sources
disconnected
Battery
Weekly
Check battery charge and water
level in the elements, if top off is
necessary add distilled water
only;
Clean the two battery poles to
remove oxidation.
Machine
stopped/
Power
sources
disconnected
General cleaning
Daily
P.P.E. USE
Wash the dirty parts with a brush
and water. Moisten the parts
exposed to the cement with
disarming oil (never fuel oil); Do
not lubricate the rubber parts
subjected to motion (belts, etc.).
Machine
stopped/
Power
sources
disconnected
SAFETY SYSTEMS
SAFETY SYSTEMS
(BELT GUARD)
Daily
Please note the requirement to
perform
the checking and
recording of verifications of safety
components every 6 months
(pursuant to article 71 of the
legislative decree 81.2008).
Machine
stopped/
Power
sources
disconnected
CHECK INTEGRITY
OF PICTOGRAMS
At the shift
start
Machine
stopped/
Power
sources
disconnected