MBW MK8-75, Руководство по безопасности и обслуживанию оператора

Страница: 34 / 68

34 of 68
4.6 TROWEL STEERING
To make the trowel move the operator must
activate the trowel control levers according to
the diagram in par. 5.5. of this publication.
IMPORTANT!
Use the machine at a reduced speed
until you have a perfect mastery of
steering and operation.
To direct the machine in the desired direction,
there are two control levers. The operator
must slowly and smoothly move the steering
levers.
To stop the trowel movement you can simply
slip the steering levers back into the rest
position.
Chapter 5 (PAR. 5.5) of this manual includes
the positions of the control levers and the
relative displacements.
4.7 TROWEL STOP
To stop the troweling machine, take the
following steps:
1. Bring the accelerator to idle speed.
2. Bring the steering levers in an
upright position.
3. Close the throttle activating the
black lever shown in figure 4.9.
4. Close the petrol tap.
5. Remove the ignition key from the
control panel.
4.8 RESTARTING THE TROWEL
To restart the machine it is necessary to
repeat the start-up process (PAR. 4.5).