MBW GPR78D, Руководство по безопасности и обслуживанию оператора

Страница: 11 / 37

- 8 -
FLUID LEVEL TO BE UP
TO BOTTOM EDGE OF
INSIDE HOLE.
1. Remove the belt guard, refer to engine assembly
pages.
2. Loosen (do not remove) the four hex head
capscrews (#28) securing the engine deck to the
base plate.
3. Tighten the belt by lifting the engine deck to provide
3/8 - 3/4 inch of “play” on one side of the belt.
Be
sure to keep the engine deck level with the base
plate when adjusting the belt.
4. Retighten the four hex head capscrews (#28).
5. Reinstall the belt guard.
Checking Hydraulic Fluid
1. To avoid contaminating the hydraulic oil clean all dirt
& debris from around the fill plug on handle.
2. Remove fill plug. With handle in operating position, oil
level to be at bottom edge of inside hole as shown.