MBTelehealth
–
SX20 Quick Set with TRC5 Remote User Guide
Page 14 of 20
Multi-Site Event Calls (MCU)
Connecting to a Multi Site (MCU) Call
If you are participating in a multi-site event (3 or more participating sites) you will
be
automatically connected
by the MBTelehealth service desk at the
scheduled
start time.
Do not
attempt to connect to another location.
You will be
automatically disconnected
at the scheduled end time.
***There will be
a 10 minute warning prior to the disconnection.
When your unit accepts a call it turns the microphone off so you will need to unmute
when your session starts.
Screen Layout/Far End: Multi-Site
– No Presentation
During Multi-Site calls, the
Screen Layout
key allows you to control how the other sites
are displayed on your screen.
1.
Press the
Home
key
then select
Camera Control.
2.
Use the softkey to select
Far End
which will enable Far End Camera Control.
3.
Use the
Up/Down arrow
keys to scroll through the layout options.
4.
Use the soft key to select
Near End
which will turn off Far End Control.
Sharing Content: Laptop
– Multi Site
1.
There will be VGA/ DVI cable already plugged into the equipment.
Plug the VGA end into your laptop and turn the laptop on.
1.
Press
Presentation
on the remote and you should see your laptop
displayed on the teleheatlh screen.
2.
Press the
Presentation
key on the remote again to turn off presentation or press the
back arrow
on the remote to return to near end control.
3.
Remove the VGA cable from the laptop to disconnect.
Screen Layout Multi Site
– No Presentation
Sharing Content
– Laptop
Multi Site
VGA Connector
HINT
If you do not see your PC image, do the following: on the laptop keyboard,
press the Function key
(Fn)
and the appropriate
F key (often F5, F8 or F10) simultaneously. A
display options menu will appear, select the
option to display on both as shown.
Connect to an MCU Call
