MBT Vaca Shape, Руководство пользователя

Страница: 15 / 24

13//22 All rights reserved
Make unlock card touch response area of the equipment;
C area: shows duration and vacuum of handpiece 4.
5.5 Ultrasonic Frequency
Picture 5.5-1 Picture 5.5-2
After you change the power supply, ultrasonic handpiece, or find energy increase or decrease, you
shall adjust the frequency.
1
）
Press key for 3s
（
Picture 5.5-1
）
; then system shows Picture 5.5-2;
2
）
Connect the handpiece needing check with the left connector, not the right connector (Picture
5.5-3); then relative picture turns yellow
（
Picture 5.5-2
）
;
3
）
Bipolar cavitation of handpiece 1 is adjusted together;
4
）
Bipolar cavitation of handpiece 2 is adjusted separately; choose the left one or right one by
touching picture ;
Picture 5.5-3
5
）
Leave some water on the cavitation part, press
“
O
”
key, find the best frequency of water
shaking by “ ” key
（
Picture 5.5-3
） ：
the two parts
’
water shaking of handpiece 1 shall
be consistent;
6) After adjustment, press
“
O
”
key, press key; means success and means
failure and press , adjust it again;
7) Press to go back to main interface;
5.6 IC Card
The issued time is saved in the IC card, while, the equipment doesn’t save it.
So equipment has no function of loss report. But the equipment could manage countless persons.