MBS THERMO PELLET, Инструкция по эксплуатации

Страница: 6 / 31

Central heating stove - MBS Thermo Pellet
PELLET
Description
Pellet is the product obtained by pressing sawdust and cuttings of dry, high-calory
wood. During pressing, additional binders are not allowed. As clean product of
biomass, pellets are CO
2
neutral, i.e. do not contribute to effect of green house.
Wood as basic ingredient of pellet is renewable source of energy and fuel of the
future.
Characteristics:
- By combustion of pellet, only 1% of ash occurs;
- Energy value is approx. 5kWh/kg;
- 2kg of pellet is approx. 1l of fuel oil;
- Combustion of pellet emits CO
2
equal to the amount used by the wood during
its growth;
- 1m
3
of pellet has mass of approx. 640kg.
How to recognize quality pellet:
- Pellet must have cylindrical shape, we recommend pellet 5 to 7mm in diameter
of 10 to 25 mm length;
- Cylindrical surface must be glossy;
- Pellet must be without dust and dirt;
- Humidity must be less then 10%;
- Package must be hermetically closed, since pellet absorbs water;
- By sinking into vessel with water, quality pellet will fall to the bottom;
- Avoid pellet of poor quality wood, wooden residues with additions of seedoil
rape and binding agents.
PACKAGE
Package of the stove is to be removed during mounting, i.e. prior to operation. All
materials may be recycled. Packing material (plastic bags, parts of polystyrene-
styropor etc.) should be kept out of reach of children, since it is potential source of
danger.
Plastic parts of package are to be disposed of to proper areas, do not burn them.
Pay attention to safety since wooden parts of package are joint with nails, thus
during disassembly and disposing of wooden bars injuries may happen.
2