Cleaning of glass surfaces – firebox glass gets dirty during operation. For cleaning, use soft
detergents. Do not use abrasive agents since glass surface may get damaged. Clean glass
when it’s cold.
Cleaning and maintenance of the chimney- cleaning and control of the chimney is
recommended at least once a year as well as after longer inactivity. Regular maintenance and
control of the chimney will prevent origination of fire and weak operation.
IRREGULARITIES IN OPERATION AND TROUBLESHOOTING
In the following table, there are most frequent operating irregularities and troubleshooting.
Table: Display of the most frequent irregularities, possible causes and troubleshooting.
Problem
Possible cause
Remedy
Stove weakly
heats and cooks
•
Irregular
handling
•
Bad chimney
•
Carefully read and
observe manual
•
In case if all
conditions from the
manual are fulfilled
and problem still
persists, call service
Problems with
firing up
•
closed air
intake regulator
•
wet woods
•
lack of oxygen
•
open air intake
regulator
and provide primary air
intake
•
use dry woods
•
ventilate the room to
provide fresh air
Smoke is coming
below the plate
•
closed air
intake regulator
•
lack of air flow
•
unclean ash
from the grid
•
open air intake
regulator and provide
primary air intake
•
carefully read manual
and apply tips for
providing air flow
•
clean the grid
Firebox door
glass has tar after
a short period of
operation
•
wet woods
•
too much fuel
•
lack of air flow
•
closed
secondary air
intake
•
use dry woods
•
see recommended
amount of fuel for
combustion given in
the manual
•
check connection with
the chimney
•
carefully read manual
and apply tips for
providing secondary
air
