Fig. 10
Cleaning of the oven interior from the tar (fig. 11) is to be done after previously described
disassemble, as follows:
• remove tar from protective sheet of the oven using cleaning tools, clean and put it on the
bottom by pressing in the vertical part of the channel for flow of the combustion gas products.
• clean tar from vertical channels as previously described
• lower surface of the oven and bottom are to be clean using cleaning tools (fig. 1,
Pos. 17), by pulling towards opening for cleaning which is already removed as described
before (fig. 1, pos. 12)
• plate (fig. 1, pos. 6) and round inlet (fig. 1, pos. 17) are to be cleaned with cleaning tools
After cleaning, assembly is to be done in reverse order of the disassembly.
Fig. 11
