MBRAUN MB 120B-G, Руководство по эксплуатации

Страница: 18 / 105

Exhaust outlet for waste regeneration gas
Connecting equipment for purge gas
Pressure reducing valve for purge gas
Required only for the “manual purging” method.
When using the optional “MBRAUN QuickPurge” purging method no preparations are required, in this case the
working gas connection is used.
Supply piping for purge gas
Required only for the “manual purging” method.
When using the optional “MBRAUN QuickPurge” purging method no preparations are required, in this case the
working gas connection is used.
Optional (length as required):
either:
9 mm dia. reinforced hose, 3 mm wall thickness and adapter, 9 mm dia. hose
nozzle with 10 mm dia. Swagelok
©
screwed fitting
or:
10 mm dia. copper pipe and 10 mm dia. Swagelok
©
screwed fitting
or:
10 mm dia. stainless steel pipe and 10 mm dia. Swagelok
©
screwed fitting
9 mm dia. hose nozzle or 10 mm dia. Swagelok
©
screwed fitting
Material:
Connection type:
Connecting the “Regeneration gas OUTLET” system connection with the factory’s
disposal facility (exhaust outlet)
Use:
Connecting the purge gas source with the purge hose
9 mm dia. reinforced hose, 3 mm wall thickness, length as required
Use:
Material:
Pressure control of the purge gas when manual purging is applied
Primary 200 bar, secondary 5 to 6 bar
9 mm dia. hose nozzle or 10 mm dia. Swagelok
©
screwed fitting
Use:
Material:
Connection type:
Chapter 3
Preparing the Connections
19