KAIROS SUB
USER MANUAL
p.21
ANOMALY CODE
DESCRIPTION
0001
PROBLEM COMMUNICATING WITH BATTERY. BATTERY STATUS DATA MAY BE DISPLAYED INACCURATELY. CHECK THAT THE WIRING AND CONTACTS OF
THE BATTERY ARE CONNECTED CORRECTLY AND INTACT.
0101
COMMUNICATION PROBLEM BETWEEN DRIVE AND HMI. CHECK THAT THE WIRING IS CONNECTED CORRECTLY AND INTACT.
0104
SPEED SENSOR NOT DETECTED. CHECK THAT THE ALIGNMENT BETWEEN THE MAGNET AND THE SPEED SENSOR IS CORRECT. CHECK THAT THE SPEED
SENSOR IS INSTALLED AND CONNECTED CORRECTLY.
0105
NON-COMPLIANT TORQUE TRANSDUCER SIGNAL. THE TORQUE TRANSDUCER SIGNAL HAS AN ANOMALY. LOW POWER OPERATION.
0106
OFFSET TORQUE TRANSDUCER NOT COMPLIANT. THE TORQUE TRANSDUCER SIGNAL HAS AN ANOMALY.
0801
ANOMALY TO MOTOR ROTATION SENSORS.
0802
PEDAL ROTATION SENSOR ANOMALY.
0804
EXCESSIVE DRIVE TEMPERATURE. THE TEMPERATURE SENSOR HAS DETECTED A TEMPERATURE ABOVE THE THRESHOLD OF DANGER.
0805
EXCESSIVE ENGINE TEMPERATURE. THE ENGINE HAS REACHED A TEMPERATURE ABOVE THE DANGER THRESHOLD.
0806
NON-COMPLIANT PERIPHERAL BUS VOLTAGE.
808
LOCKED ROTORS. THE ENGINE FAILED TO START DUE TO A MECHANICAL BLOCKAGE OR A PROBLEM WITH THE INTERNAL WIRING OF THE DRIVE UNIT.
3.10 ERROR CODE
In the event of an anomaly, the system reports the problem to the user by displaying a danger icon combined with a
4-character code, which allows you to trace the type of error.
Depending on the type of anomaly, the system could prevent the engine from being activated or make it run at reduced
power. Where it is indicated "request assistance", the intervention of an OLI eBike Systems technician is required.
attention
Depending on the type of failure, the sys-
tem may prevent the engine from start-
ing or operating at full power.
