FUNK CROSS
USER MANUAL
p.30
7.3 Bicycle parking
The bicycle is equipped with a stand for lateral support, therefore, before leaving the bicycle check that the stand is com-
pletely extended and resting on a stable ground.
The bicycle must be parked in the prepared parking areas and, in any case, without obstructing the passage paths, emer-
gency exits, electrical panels and workstations antifire.
7.2 Braking
To minimize the stopping distances of the vehicle it is necessary to suddenly stop pedaling and, subsequently, apply brak-
ing force gradually so as not to destabilize the middle.
Encourage the use of the rear brake under braking to stabilize the bicycle.
ATTENTION
DRIVING CONDUCT
Excessive braking force can trigger harmful phenomena such as locking the wheel or overturning the vehicle. It is very dan-
gerous to brake when cornering: you may lose control of your bike.
7.1 Use of the bicycle
Before using the pedal-assisted bicycle in places open to traffic, it is advisable to familiarize yourself with the behavior
of the vehicle. The first uses must be made in private environments away from traffic, other cyclists and obstacles of any
kind. The driver must adapt the driving speed of the pedal-assisted bicycle to the conditions of the route and the presence
of other vehicles or pedestrians. Especially when facing curves you have to keep a moderate speed (the smaller the radius
of the curve, the lower the speed). When the driver stops pedaling or the speed reaches 25 km/h, the electric motor no
longer provides assistance and the bicycle proceeds completely managed by the Pedals.
It is essential to gain experience in driving the pedal-assisted bicycle, before proceeding at a high speed. In case you do not
want to use the motor, simply remove the battery or set the lower level of assistance.
