MBM 408A Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 48

background image

3

Safety Instructions

Definition of Symbols and Notes
In this manual following names and signs stand for possible dangers.

Danger

This Symbol stands for immediate danger threatening the life and
health of persons. Disregarding these instructions may cause severe
damage to health and even serious injuries.

Caution

This symbol stands for an endangering situation that may occur.
Disregarding these instructions may lead to slight injuries or damage to
property.

Danger

Make sure that the machine is electrically grounded. This prevents an electric shock
when there is a leak of electricity.

Use the machine at 230VAC with a frequency of 50/60Hz. A fire may start or the
machine may break down if a higher or lower voltage is used, or if an electric
current with a frequency that is not within the range of frequency stated above.

Do not place any object on this machine. A fire may start or electricity may leak if water
or a foreign object enters inside the machine.

Handle the power cable with care. A fire may start or an electric shock may be
caused if the cable is damaged, broken, or processed, if a heavy object is placed on the
cable, or if the cable is bent forcibly.

Do not pull the power plug out of or put it in the electric outlet using a wet hand.
Otherwise, an electric shock may be caused.

Do not remove the cover of this machine. Otherwise, an electric shock or injury may
be caused.

Do not remodel this machine. Otherwise, a fire may break out or an electric shock may
be caused.

If the machine is used when it is in an abnormal condition, such as generating heat,
emitting smoke, and giving out a strange smell, a fire may break out or an electric
shock may be caused. Turn off the power switch immediately and then pull the power
plug out of the electric outlet. Afterward, consult with your dealer.

If abnormalities such as the power cable generating heat and giving out a strange smell
are found, turn off the power switch immediately and then pull the power plug out of
the electric outlet. Afterward, consult your dealer.

If a foreign object enters into the machine, turn off the power switch first and then pull
the power plug out of the electric outlet. Afterward, consult your dealer.

If thunder approaches, pull the power cable out of the electric outlet to prevent a fire or
breakdown caused by the falling of a thunderbolt.

https://www.supplychimp.com

«
1
2
3
4
5
...
»

Содержание 408A

















































Отзывы:

Нет отзывов

Похожие инструкции для 408A

Бренд: Jack Страницы: 8

Бренд: Jack Страницы: 10

Бренд: Bally Страницы: 34

Speed Scrub 2601

Бренд: Nobles Страницы: 75

Бренд: Singer Страницы: 3

Бренд: Radio Shack Страницы: 32

Бренд: ELNA Страницы: 230

Lavina 25L HV Pro

Бренд: Superabrasive Страницы: 29

Бренд: Baby Lock Страницы: 226

Бренд: DeLuxe Stitcher Страницы: 48

Бренд: Janome Страницы: 61

Truvox International Orbis Compact

Бренд: Tacony Страницы: 14

ellegante 2 BLG2

Бренд: Baby Lock Страницы: 8

Бренд: IPS Страницы: 6

Бренд: JUKI Страницы: 124

Бренд: JUKI Страницы: 135

Бренд: JUKI Страницы: 115

Бренд: Goddess Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды