10
First time operation
Depending on the device type, connect an antenna and insert a SIM card.
Connection to the power source
ATTENTION
Before connecting the mbSPIDER to a network or PC, first ensure that it is
properly connected to a power source, otherwise it may cause damage to other
equipment. You should therefore follow the instructions given below!
Connect the (10-30 V DC) power source to the terminals 1 (V+) and 2 (GND).
Ensure correct polarity!
After switching on the
power source:
Power LED lights up .
After 20-30 seconds:
Ready LED flashes
.
After approx. 60 seconds:
Ready LED and Power LED lit up continuously.
The mbSPIDER is now
ready for operation.
Connecting the mbSPIDER with the configuration PC
To be able to access the web interface of the device, you must connect it to a
configuration PC using the supplied network cable.
