13
Loading the factory settings
ADVICE
When the mbSPIDER is reset to the factory settings, all the data (log files, visua-
lization configuration and system configuration) is lost.
Ensure that no USB stick is connected to the device.
1.
Turn on the device or, if the device is on, press the
Reset
button..
2.
Then immediately press the
Function
button and
keep it pressed.
3.
After 20 - 30 seconds the LED Ready starts to flash.
4.
Approximately 10 sec later, the LEDs
Fc1
,
Fc2
, and
Fc3
will flash.
5.
Now release the
Function
button.
6.
20 - 30 seconds later, the LEDs
Power
+
Ready
light up.
The
mbSPIDER
is now ready for operation and can / must be reconfigured.
