background image

Mini mod. B Electronic Grinder-Doser

Mini mod. B Electronic Grinder-Doser

Mini mod. B Electronic Grinder-Doser

Mini mod. B Electronic Grinder-Doser

In order to adjust the size of the portion dispensed, one has to regulate the trimmer setting, 

positioned above the filterholder. 

The trimmer on the left regulates the single dose (one cup). 

The trimmer on the right regulates the double dose (two cup).

By turning the trimmer setting clockwise, the portion is increased. Turning it anticlockwise 

results in an reduction of the portion. 

A rotation of 180° (half a turn) of the trimmer results in a variation of about one gram of ground 

coffee dispensed. 

In order to collect the portions of ground coffee dispensed, insert the coffee machine’s filter 

holder all the way onto the fork-shaped support under the ground coffee outlet.

PRESSING   

PRESSING   

PRESSING   

PRESSING   

(Grinder-Dosers)

(Grinder-Dosers)

(Grinder-Dosers)

(Grinder-Dosers)

STATIC PRESSING DEVICE: place the filter holder against the underside of the pressing 

device and push upwards. 

SPRING PRESSING DEVICE: place the compacting disk against the upper face of the filter 

holder inserted in the fork-shaped support and press down on the spring pressing device knob.

9) WARNINGS REGARDING OPERATION

9) WARNINGS REGARDING OPERATION

9) WARNINGS REGARDING OPERATION

9) WARNINGS REGARDING OPERATION

 

 

 

 

 

 

 

                                                            

                                                           

                                                           

                                                           

 

 

 

 

 

 

 

 

Do not leave the appliances turned ON without coffee in the hopper. 

In the Grinder-Doser version, avoid pulling the dosing lever partially, always pull it all the way.

In the Coffee Grinder version it is essential that  nothing 

hinders the flow of ground coffee from the outlet in any way 

in   order   to   prevent   the   risk   of   the   appliance   stopping. 

Consequently, avoid using coffee bags which are too small 

with respect to the amount of coffee to be ground. At the end 

of each grinding-cycle, shake the handle of the spout for a 

complete outlet of the coffee.

Do not insert, when filling the hopper with coffee beans, foreign objects. Handle with clean 

hands.

After any hopper filling and in normal use of the appliance, the hopper lid must be positioned 

correctly.

8888

SINGLE DOSE

ADJUSTMENT TRIMMER

DOUBLE DOSE

ADJUSTMENT TRIMMER

STATIC

SPRING

PRESSING DEVICE

PRESSING DEVICE

COFFEE

OUTLET SPOUT

Содержание COFFEE GRINDER SUPER JOLLY













Отзывы: