4
6) USE
This appliance has been designed solely for grinding coffee beans.Any other use is
understood to be improper, and consequently hazardous.The manufacturer cannot
be held responsible for any damage as a result of improper or incorrect use.
Do not use the appliance for grinding other types of food, or anything else.
Do not use the doser (grinder-doser version) to store foods or measure them.
THE COFFEE GRINDERS AND COFFEE GRINDER-DOSERS MANUFACTURED
BY OUR COMPANY ARE INTENDED FOR SKILLED PERSONNEL ONLY FOR
PROFESSIONAL USE AND
NOT FOR HOUSEHOLD USE
.The user must be
an adult. Do not allow children or incapable persons to use the appliance.
7) INSTALLATION AND WIRING
The appliance must be installed by skilled technical personnel in conformity with
the safety rules in force. Incorrect installation may result in injury of persons or
animals, or damage to property, for which the manufacturer cannot be held
responsible.
•
The appliance must be placed on a stable, flat surface.
•
Before plugging in the appliance, make sure the voltage and frequency values of
the supply mains correspond to the ratings indicated on the label featuring the
appliance’s technical data.
•
The wall socket must be fitted with an efficient earth contact. Consequently, it
is essential to make sure the earth system is efficient and in conformity with
current safety rules. If in any doubt, have the system thoroughly checked by per-
sonnel with the appropriate professional skills.
IT IS COMPULSORY TO EARTH THE APPLIANCE.
The manufacturer cannot be held responsible in the event this regulation is not
complied with.
•
It is essential to make sure the ratings of the system are suitable for the power
absorbed by the appliance - as indicated on the label featuring the technical data
- and that the wall socket is protected against overcurrents.
•
Do not use extension cables, plug adapters for multiple sockets or makeshift
connections.
•
In EEC member countries, the regulation in force calls for the external equipoten-
tial terminal
on the outer part of the appliance’s base plate to be connected to
a equipotential node if the installation is to be correct.
