Mazda CX-3, Руководство пользователя

Страница: 30 / 785

When Driving
27
For details, refer to Section 4, “i-ACTIVSENSE”.
Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system
Do not use the MRCC with Stop & Go function system in the following
locations, using the MRCC with Stop & Go function system at the following
locations may result in an unexpected accident:
WARNING
For safety purposes, switch the MRCC with Stop & Go function system
off when it is not being used.
Do not get out of the vehicle while the stop hold control is operating:
Getting out of the vehicle while the stop hold control is operating is dangerous
as the vehicle may move unexpectedly and result in an accident. Before getting
out of the vehicle, switch the MRCC with Stop & Go function system off, shift
the selector lever to the P position, and apply the electric parking brake (EPB).
• General roads other than highways
• Roads where frequent and repetitive acceleration and deceleration occur.
• When entering and exiting interchanges, service areas, and parking areas
of highways.
• Roads with sharp curves and where vehicle traffic is heavy and there is
insufficient space between vehicles.
• Slippery roads such as ice or snow-bound roads
• Long, descending slopes.
• Slopes with a steep gradient.
NOTE
The MRCC with Stop & Go function system does not detect the following as
physical objects.
• Vehicles approaching in the opposite direction
• Pedestrians
• Stationary objects (stopped vehicles, obstructions)
• If a vehicle ahead is travelling at an extremely low speed, the system may
not detect it correctly.
CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 29 CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 29 2019/11/22 9:08:02 2019/11/22 9:08:02