Mazda CX-3, Руководство пользователя

Страница: 276 / 785

Dynamic Stability Control
(DSC)
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such as
ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive manoeuvring,
enhancing vehicle safety.
Refer to ABS (page 4-88) and TCS (page
4-89).
DSC operation is possible at speeds
greater than 20 km/h (12 mph).
The warning light turns on when the
system has a malfunction.
Refer to Contact Authorised Mazda
Repairer and Have Vehicle Inspected on
page 7-36.
WARNING
Do not rely on the Dynamic Stability
Control as a substitute for safe driving:
The Dynamic Stability Control (DSC)
cannot compensate for unsafe and reckless
driving, excessive speed, tailgating
(following another vehicle too closely), and
hydroplaning (reduced tyre friction and
road contact because of water on the road
surface). You can still have an accident.
CAUTION
¾
The DSC may not operate correctly
unless the following are observed:
¾
Use tyres of the correct size speci fi ed
for your Mazda on all 4 wheels.
¾
Use tyres of the same manufacturer,
brand and tread pattern on all 4
wheels.
¾ Do not mix worn tyres.
¾ The DSC may not operate correctly when
tyre chains are used or a temporary spare
tyre is installed because the tyre diameter
changes.
▼
TCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched ON.
If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS, DSC or the
brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an expert
repairer (we recommend an Authorised
Mazda Repairer).
When Driving
ABS/TCS/DSC
4-91
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52