4–56
When Driving
Switches and Controls
NOTE
Some gate operators and garage door
openers may require you to replace this
Programming Step 2 with procedures
noted in the “Gate Operator/Canadian
Programming” section.
4. After the HomeLink indicator light
changes from a slow to a rapidly
blinking light, release both the
HomeLink and hand-held transmitter
buttons.
NOTE
If the HomeLink indicator light does not
change to a rapidly blinking light, contact
HomeLink at
www.homelink.com
or call
1-800-355-3515
for assistance.
5. Connect power to the device being
programmed.
6. Firmly press and hold the programmed
HomeLink button for
¿
ve seconds,
and then release it. Perform this
operation two times to activate the door
or gate. If the door or gate does not
activate, press and hold the just-trained
HomeLink button and observe the
indicator light.
If the indicator light stays on
constantly, programming is complete
and your device should activate when
the HomeLink button is pressed and
released.
NOTE
To program the remaining two HomeLink
buttons, begin with “Programming”
—
step 1
If the indicator light blinks
rapidly
for two seconds and then turns
to a constant light, continue with
“Programming” steps 7—9
to
complete the programming of a rolling
code equipped device (most commonly
a garage door opener).
7. At the garage door opener receiver
(motor-head unit) in the garage, locate
the “learn” or “smart” button. This can
usually be found where the hanging
antenna wire is attached to the motor-
head unit.
8. Firmly press and release the “learn” or
“smart” button. (The name and color of
the button may vary by manufacturer.)
NOTE
Complete the programming within 30
seconds.
9. Return to the vehicle and
¿
rmly
press,
hold for two seconds and release
the
programmed HomeLink button. Repeat
the “
press/hold/release
” sequence a
second time, and, depending on the
brand of the garage door opener (or
other rolling code equipped device),
repeat this sequence a third time to
complete the programming process.
HomeLink should now activate your
rolling code equipped device.
NOTE
To program the remaining two HomeLink
buttons, begin with “Programming”
—
step 1
For questions or comments, please contact
HomeLink at
www.homelink.com
or
1-
800-355-3515
.
Mazda3̲8FA4-EA-15G̲Edition2.indb 56
Mazda3̲8FA4-EA-15G̲Edition2.indb 56
2015/07/16 8:44:43
2015/07/16 8:44:43
Содержание 3-sport 2016
