Mazda 2007 CX-7, Руководство по ремонту кузовов

Страница: 15 / 138

GENERAL INFORMATION
00-00–13
00-00
•
Before spot welding, make a trial weld using the
same material as the body panel to check the
weld strength.
Checking Weld Strength
•
Installation locations of the engine, chassis, and
seat belts are designated as important safety
locations for weld strength. Check weld strength
by driving a chisel between the panels at every
fourth or fifth weld spot, and every tenth regular
weld location.
•
Drive the chisel between the panels according to
the number of panels as shown below.
•
To determine weld strength, drive the chisel
between the panel and check whether the panels
come apart. If the panels come apart, make
another weld near the original weld.
•
Restore the shape of the checked area.
End Of Sie
Test piece method
Nugget diameter
:4/5 of tip
acxuub00000071
Chisel dimensions
25mm
{0.98in}
8mm{0.31in}
{0.20in}
{0.20in}
20
°
Weld location
Within 5mm
Within 5mm
acxuub00000057
Two panels
Weld location
Three panels
Weld location
One location
Two location
Four panels
Weld location
Three location
acxuub00000058
3419-1U-06C(00-00).fm 13 ページ ２００６年３月２２日 水曜日 午後４時１４分