Mazda 1996 626, Руководство по обслуживанию

Страница: 507 / 533

AIR BAG SYSTEM
S
AIR BAG MODULE DISPOSAL PROCEDURE
Before scrapping a vehicle with an undeployed air bag module, deploy the air bag. Never dispose of a
live air bag module. If the deployment tool
SST is not available, consult the nearest Mazda representa­
tive for assistance.
Air Bag Deployment
1. Move the vehicle to an open space, away from strong
winds, and open all of the vehicle’s doors.
2. Disconnect the negative battery cable and wait for more
than one minute to allow the backup power supply to
deplete its stored power.
3. Follow the appropriate procedure for the driver-side or
passenger-side air bag module.
Driver-side air bag module
( 1 ) Make sure the air bag module is firmly mounted to
the steering wheel.
(2) Remove the driver-side undercover and lower
panel.
(Refer to the 1996 626/MX-6 Workshop Manual,
section S.)
(3) Disconnect the orange and blue clock spring con­
nectors.
(4) Inspect the SST.
(Refer to page S-25.)
(5) Connect the SST to the clock spring connector as
shown in the figure.
Passenger-side air bag module
(
1
) Remove the glove compartment.
(Refer to the 1996 626/MX-6 Workshop Manual,
section S.)
(
2
) Disconnect the orange and blue passenger-side air
bag module connector.
S -2 3