Page 4 of 4
AS 090-M11406cma0708
12
Care and Cleaning
A. Always remove mask before washing vehicle.
B. Hand clean mask using mild soap, rinse thoroughly with
clean water and line dry completely. Do not machine dry!
C. Use Mazda Vinyl/Leather Protectant (or equivalent) to
preserve color and finish.
D. WARNING: Running up on curb will damage this product.
Manufacturer will not be responsible for damage to product
due to accident or misuse.
11
Post Installation Inspection
A. Close hood and check alignment between hood cover
and front end cover along seam (between fender and
hood). If adjustment is necessary, adjust the hood cover
by adjusting the hood cover straps. Refer to step 1.
B. If mask should flap due to high speed or wind conditions,
adjust or remove mask completely.
C. Provide installation instructions to final customer.
9
Install vent attachments
A. On both sides of vehicle, insert pad (R) between fog
light mounting bracket and bumper.
B. Attach plastic clips (S) to rear edge of fog light vents.
S
S
R
10
Install lower clips
A. On both sides of the vehicle attach plastic clips (T) to
bottom edge of bumper.
T
