Page 3 of 10
B
DRILL HOLE IN BUMPER FASCIA
Drill + 6mm bit
Tape Measure
Tools Needed:
1. Locate attachment point (a) on the bumper
fascia to measure the drill point for the
tie wrap attachment. Measure 40mm towards
the receiver tube of the hitch and 15mm
upwards. Drill a 6mm hole at the drill point.
C
Continues on next page
DRILL HERE
1
40mm
15mm
Bumper fascia
mount
(a)
REFERENCE IMAGE
Bumper
Fascia
(a)
DRILLED HOLE
Tow Hitch Cross Member
UNDERSIDE OF VEHICLE
4-Flat Harness Routing Overview
Tie Wrap
(d)
Tie Wrap
(e)
Tie Wrap
(a)
Tie Wrap
(b)
Tie Wrap
(c)
4-FLAT HARNESS REROUTE TO HITCH RECEIVER
