Mazda RX-8
㧙
16
13. Secure the antenna cable to the vehicle wiring harness
with tie wraps (small).
14. Connect the antenna cable to the DLP unit.
15. Bundle the redundant part of the antenna cable into a loop
and affix it to the vehicle panel using pad protector halves.
INSTALLING iPod INTEGRATION MODULE
Preparation for iPod integration module installation
1. Affix the tie wrap (large) to the iPod integration module
with a pad protector (1) as shown in the figure.
2. Affix the pad protectors to the iPod integration module as
shown in the figure.
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
iPod integration module
Pad protector
Tie wrap (large)
iPod integration module
Pad protector
㩷
1/2 x 1
Pad protectors
㩷
1/3 x 3
Pad protectors
㩷
1/3 x 3
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
x
When installing Sirius only, begin with Step 1 on page 21.
NOTE
8
x
Bundle the antenna cable into a loop and attach it to
the sheet metal on the interior side of the trunk, and
secure with pad protector halves.
NOTE
Antenna cable
Tie wraps (small)
Pad protector 1/2
DLP unit
Vehicle front
Vehicle wiring harness
x
Be sure to bundle the harness into a loop.
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION