Mazda RX-8
㧙
13
6. Secure the tie wraps (large) to the DLP unit with a pad
protector as shown in the figure.
7. Install the DLP unit to the inside of the side body panel of
the trunk compartment using tie wraps (large).
(With the connector towards the front of the vehicle.)
Pad protector
Tie wraps (large)
DLP unit
120 {4.72}
mm {in}
Tie wraps (large)
DLP unit
Side body panel
Vehicle front
Align side of DLP unit with
line of side body panel
x
When securing the DLP unit, be sure to align the side
of the DLP unit with the line of the side body panel.
If it deviates rearward of the side body panel line,
the DLP unit will interfere with the trunk side trim and
cannot be installed.
x
To ensure proper affixing, be sure to degrease the
area where the double-sided adhesive tape is affixed.
CAUTION