Mazda RX-8
㧙
12
INSTALLING DLP UNIT
1. Remove the bushes (4 locations), brackets (2 locations),
washers (4 locations), and screws (4 locations) from the
DLP unit.
2. Affix pad protectors to the DLP unit as shown in the
figure.
3. Cut off the excess part of pad protectors.
4. Adhere double-sided adhesive tapes to the top of the pad
protectors.
5. Affix pad protector half to the DLP unit as shown in the
figure.
6
Pad protectors
DLP unit
Double-sided adhesive tapes
Pad protectors
DLP unit
Cut
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
Pad protector 1/2
DLP unit
DLP unit
Bracket
Bush
Washer
Screw
Bracket
Bush
Washer
Screw
x
The brackets are not used with the installation of this
accessory.
Note
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION