FILLING THE REMOVABLE WATER
TANK WHILE ATTACHED
1. Ensure the iron is unplugged.
2. Set the Steam Control to “Off”
(image A)
.
3. Open the Water Fill Cover/Inlet.
4. Fill the Removable Water Tank to the max level
mark on the outside of the Removable Water Tank.
To avoid leakage, do not overfill
(image B)
.
5. Close the Water Fill Cover/Inlet.
A
C
DETACHING AND FILLING THE
REMOVABLE WATER TANK
1. Set the Steam Control to Off
(image A)
.
If removing the Removable Water Tank, it is
not necessary to unplug the iron.
2. Disconnect the Removable Water Tank by
pressing the Water Tank Release Button
and gently pulling the Water Tank away
(image C)
.
3. Open the Water Fill Cover/Inlet.
4. Fill water through inlet hole by placing under
the sink or using a cup. Do not fill above
max level
(image D)
.
5. Re-connect the Removable Water Tank by holding
the Water Tank Release Button, inserting the
Removable Water Tank, then releasing the Water
Tank Release Button.
B
E
8
USING THE REMOVABLE WATER TANK
USING THE REMOVABLE WATER TANK
DRAINING THE WATER
1. Ensure that the iron is off and unplug the iron.
Allow the iron to cool.
2. Open the Water Fill Cover, and hold the iron
upside down over a sink
(image E)
. You can also
detach the Removable Water Tank from the rest of
the iron to empty the tank into the sink.
Note: Do not use soap or chemicals in the
Removable Water Tank. Only fill with water.
It is recommended to clean the Removable
Water Tank after every use.
D
9
