background image

19

MAYTAG

®

 COMMERCIAL LAUNDRY  

LIMITED WARRANTY

1.  All other costs including labor, transportation, shipping, or custom duties for 

covered parts.

2.  Factory specified replacement parts if this commercial appliance is used for other 

than normal, commercial use or when it is used in a manner that is inconsistent to 

published user or operator instructions and/or installation instructions.

3.  Service calls to correct the installation of your commercial appliance, to instruct 

you on how to use your commercial appliance, to replace or repair house fuses, 

or to correct external wiring or plumbing. 

4.  Service calls to repair or replace appliance light bulbs, air filters, or water filters. 

Consumable parts are excluded from warranty coverage.

5.  Damage resulting from improper handling of product during delivery, theft, 

accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, 

installation not in accordance with local electrical or plumbing codes, or use of 

products not approved by Maytag. 

6.  Pick up and delivery. This commercial appliance is designed to be repaired on 

location. 

7.  Repairs to parts or systems resulting from unauthorized modifications made to 

the commercial appliance.

8.  The removal and reinstallation of your commercial appliance if it is installed in an 

inaccessible location or is not installed in accordance with published installation 

instructions. 

9.  Damage resulting from exposure to chemicals.
10. Changes to the building, room, or location needed in order to make the 

commercial appliance operate correctly. 

11. Factory specified replacement parts on commercial appliances with original 

model/serial numbers that have been removed, altered, or cannot be easily 

determined. 

12. Discoloration, rust, or oxidation of stainless steel surfaces. 
13. Factory specified replacement parts as a result of incorrect diagnosis or repair  

by an “out of network” service company. 

The cost of repair or replacement under these excluded circumstances shall  

be borne by the customer.

FIVE YEAR LIMITED WARRANTY  

(PARTS ONLY — LABOR NOT INCLUDED)

For the first five years from the original date of 

purchase, when this commercial appliance is 

installed, maintained, and operated according to the 

instructions attached to or furnished with the product, 

Maytag brand of Whirlpool Corporation (hereafter 

“Maytag”) will pay for factory specified replacement 

parts to correct defects in materials or workmanship 

that existed when this commercial appliance was 

purchased. This limited warranty does not include 

labor. 
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS 

LIMITED WARRANTY SHALL BE PRODUCT REPAIR 

AS PROVIDED HEREIN. Maytag recommends that 

you use an “in network” service provider to diagnose 

and repair your Commercial Laundry product. 

Maytag will not be responsible under this warranty 

to provide additional replacement parts as a result of 

incorrect diagnosis or repair by an “out of network” 

service company. This limited warranty is valid in the 

United States or Canada and applies only when the 

commercial appliance is used in the country in which  

it was purchased. This limited warranty is effective 

from the date of the original consumer purchase.  

Proof of original purchase date is required to obtain 

service under this limited warranty.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A 

PARTICULAR PURPOSE, ARE LIMITED TO FIVE YEARS OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do  

not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty 

gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. MAYTAG 

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or 

limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific 

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the 

representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes  

with this major appliance, you should ask Maytag or your retailer about buying an extended warranty.

 

08/16

IF YOU NEED SERVICE:
Contact your authorized Maytag

®

 Commercial Laundry distributor. To locate your authorized Maytag

®

 Commercial Laundry distributor,  

visit 

www.MaytagCommercialLaundry.com.

For written correspondence:

Maytag

®

 Commercial Laundry Service Department

2000 N M 63

Benton Harbor, Michigan 49022-2632 USA

FIVE YEAR LIMITED WARRANTY

WHAT IS COVERED

WHAT IS NOT COVERED

Содержание MAT20PDAWW









































Отзывы: