Installation
6
Oven Assembly
OVEN SUPPORTS AND CASTERS
1. Bolt the supports to the oven with 3/8-16 hex
head bolts.
NOTE: Install the locking casters on the front
of the oven.
2. Carefully place the oven onto casters. Have
several persons lift the oven off the pallet and
set it onto the casters.
3. Engage the brakes on the front casters.
Figure 3
STACKING THE OVENS
1. Install the legs on the bottom unit.
2. Rest the top oven on its back.
3. Install the four oven alignment pins into the
holes provided on the bottom of the oven.
NOTE: See Figure 4 for location of alignment
pins.
4. Carefully lift the upper oven off the pallet and
place it on the lower oven. Have several per-
sons lift the oven off the pallet and set it onto
the casters.
5. Locate alignment pins with holes in frame of
the bottom oven.
Alignment Pin
Bottom oven
Figure 4
6. Install the stacking rails between the control
boxes. One rail will be on the front of the con-
trol box and the other at the back of the box.
Secure with screws at the top of the lower box.
Front
Stacking
Rail
Rear
Stacking
Rail
Figure 5
