Maytag Amana CEC96 Series, Руководство по установке, Страница: 5 / 60

5
Product Description
Features
The *MEC96 furnace may be installed upflow or horizontally
with left or right side down. The *CEC96 furnace may be
installed downflow or horizontally with left or right side
down. *MEC96 & *CEC96 two-stage gas furnaces features
a multi-speed ECM indoor fan motor, two heating inputs
(W1 & W2), two cooling inputs (YLO & Y) and a two stage
gas valve. A single stage heating thermostat may also be
used in conjunction with timed transition to high fire by
the furnace integrated control board.
Product Application
This furnace is primarily designed for residential home-heating
applications. It is NOT designed or certified for use in mo -
bile homes, trailers or recreational vehicles. Neither is it
designed or certified for outdoor applications. The furnace
must be installed indoors (i.e., attic space, crawl space,
or garage area provided the garage area is enclosed with
an operating door).
This furnace can be used in the following non-industrial
commercial applications:
Schools, Office buildings, Churches, Retail stores, Nursing
homes, Hotels/motels, Common or office areas
In such applications, the furnace must be installed with the
following stipulations:
• It must be installed per the installation instructions
provided and per local and national codes.
• It must be installed indoors in a building constructed
on site.
• It must be part of a ducted system and not used in a
free air delivery application.
B10259-216
CO can cause serious illness including permanent brain
damage or death.
Advertencia especial para la instalación de calentadores ó manejadoras
de aire en áreas cerradas como estacionamientos ó cuartos de servicio.
B10259-216
El monóxido de carbono puede causar enfermedades severas
como daño cerebral permanente ó muerte.
Las emisiones de monóxido de carbono pueden circular a través
del aparato cuando se opera en cualquier modo.
B10259-216
RISQUE D'EMPOISONNEMENT AU MONOXYDE DE CARBONE
Le monoxyde de
des
carbone peut causer des maladies graves telles que
dommages permanents au cerveau et meme la mort.
Cette ventilation est nécessaire pour éviter le danger d'intoxication
au CO pouvant survenir si un appareil produisant du monoxyde
de carbone continue de fonctionner au sein de la zone confinée.
• It must not be used as a “make-up” air unit.
• It must be installed as a two-pipe system for
combustion air.
• All other warranty exclusions and restrictions apply
This furnace is an ETL dual-certified appliance and
is appropriate for use with natural or propane gas
( NOTE: If using propane, a propane conversion kit is
required).
Dual certification means that the combustion air inlet pipe is
optional and the furnace can be vented as a:
Non-direct vent (single pipe) central forced air furnace
in which combustion air is taken from the installation
area or from air ducted from the outside or,
Direct vent (dual pipe) central forced air furnace
in which all combustion air supplied directly to the
furnace burners through a special air intake system
outlined in these instructions.
This furnace may be used as a construction site heater
ONLY
if all of the following conditions are met:
• The vent system is permanently installed per these
installation instructions.
• A room thermostat is used to control the furnace. Fixed
jumpers that provide continuous heating CANNOT be
used and can cause long term equipment damage.
Bi-metal thermostats, or any thermostat affected
by vibration must not be used
during construction.