13
CAUTION:
OVEN WINDOW
To protect the oven door window:
1. Do not hit the glass with pots, pans, furni-
ture, toys, or other objects.
2. Do not close the oven door until the oven
racks are in place.
Scratching, hitting, jarring or stressing the glass
may weaken its structure causing an increased
risk of breakage at a later date.
CAUTION:
Oven Lights
To assure the proper replacement bulb
is used, order bulb from Maytag Cus-
tomer Service. Call 1-800-688-8408, ask
for part number 74004458 - halogen bulb.
➢
Disconnect power to range before
replacing light bulb.
➢
Allow oven, bulb cover and bulb to
cool before touching.
➢
Do not remove aluminum washer
from bulb cover when replacing the
bulb.
To replace oven light bulb:
There are two halogen light bulbs located
at the front corners of the oven cavity.
1.
When oven is cool, turn bulb cover to
remove.
2.
Carefully remove old bulb by pulling
straight out of ceramic base.
3.
To avoid damaging or decreasing the
life of the new bulb, do not touch the
bulb with bare hands or fingers. Hold
with a cloth or paper towel. Push new
bulb prongs straight into small holes of
ceramic base.
4.
Replace bulb cover by turning until tight.
5.
Reconnect power to the range. Reset
clock.
Maintenance
Oven Door
➢
Do not place excessive weight on or
stand on an open oven door. This
could cause the range to tip over,
break the door, or injure the user.
➢
When opening the oven door, allow
steam and hot air to escape before
reaching in oven to check, add or
remove food. This is especially im-
portant when using the Speed Op-
tions feature as you may notice more
moisture in oven with speed cooking.
➢
The oven door can only be removed
by an authorized servicer. Do not
attempt to remove the door yourself.
Convenience Outlet
(C
ANADIAN
MODELS
ONLY
)
The convenience outlet is located on the
lower left side of the backguard.
Be sure appliance cords do not rest on or
near the surface element. If the surface
element is turned on, the cord and outlet
will be damaged.
The convenience outlet circuit breaker
may trip if the small appliance plugged
into it exceeds 10 amps. To reset the
circuit breaker, press the switch located
on the lower edge of the backguard.
Leveling Legs
➢
Be sure the anti-tip bracket
secures one of the rear lev-
eling legs to the floor.
This bracket
prevents the
range from ac-
cidentally tipping.
The range should be leveled when installed.
If the range is not level, turn the plastic
leveling legs, located at each corner of the
range, until range is level.
CIRCUIT BREAKER SWITCH
ANTI-TIP BRACKET
LEVELING LEG
Storage Drawer
The storage drawer at the bottom of the
range is safe and convenient for storing
metal and glass cookware. DO NOT store
plastic, paperware, food or flammable
material in this drawer. Remove drawer to
clean under range.
To remove: Empty drawer then pull out to
the first stop position. Lift up front of
drawer and pull to the second stop posi-
tion. Grasp sides and lift up and out to
remove drawer.
To replace: Fit the ends of the drawer
glides onto the rails. Lift up drawer front
and gently push in to first stop position.
Lift up and continue to slide drawer to the
closed position.
BULB COVER
HALOGEN BULB
