4-3
1. The chemical dispenser assembly has two
lids covering four dispenser openings.
2. Open the left lid to access the prewash
dispenser on the left, and the detergent
dispenser for the main wash on the right.
3. Open the right lid to access the bleach
dispenser on the left, and the fabric softener
dispenser on the right.
4. A cap is provided, to cover the prewash
dispenser, if prewash is not desired.
5. To remove the chemical dispenser, mark
the hoses for proper reassembly.
6. Use a 7mm nut driver, Phillips, or Flat blade
screwdriver to loosen the hose clamps
securing the water inlet hoses to the back of
the chemical dispenser assembly.
7. Pull the hoses with a twisting motion
to remove the hoses from the chemical
dispenser.
8. Slide the hose clamps down the hoses.
9. Loosen the hose clamp on the dispenser
outlet hose.
10. Grasp the hose, twist and slide it off the
outlet.
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before
operating.
CHeMiCaL DiSpenSer aSSeMBLY
Prewash
Dispenser
Detergent
Dispenser
Bleach
Dispenser
Fabric
Softener
Prewash
Cap
Dispenser
Outlet Hose
Содержание MYR20
