MAYSER RADIOBAND 3G, Руководство пользователя, Страница: 15 / 24

4.2 MODE 2: Safety edge connected to IN1 activates R2
Safety edge connected in IN1 will activate R2.
Employed receiver memory = 1 transmitter
Programming sequence:
 Press PROG button on the receiver (1) until R2 LED lights (2).

Press PROG button on the transmitter (3).

A beep will be heard on the receiver indicating the transmitter is properly
programmed (4).

To exit programming mode, wait for 20 seconds or press PROG button on the
receiver. Two beeps will be heard.
UM_320XXXX_RB3SYSTEM_EN_MAYSER_Rev00 Página 15/24