Mayr ROBA-diskstop 894.5 Series, Инструкция по установке и эксплуатации

Страница: 9 / 17

Installation and Operational Instructions for ROBA
®
-diskstop
®
Type 894.5_ _._ _ Sizes 9 and 10
(B.8.4.5.EN)
27/08/2020 TK/TL/GC/SU Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Phone: +49 8341 804-0, Fax: +49 8341 804-421
Page 9 of 17 www.mayr.com , E-Mail: public.mayr@mayr.de
Table 1: Technical Data
Size 9 10
Max. braking force 8749 N 11182 N
Min. braking force 5029 N 4551 N
Braking force tolerance
0 / +60 % 0 / +60 %
Max. friction work
1)
Q
r max.
per braking action 400000 J 400000 J
Brake disk diameter D 600
– 1200 mm
650
– 1500 mm
Effective friction diameter D
eff
D
eff
= D
– 80 mm
D
eff
= D
– 80 mm
Max. trigger speed
25.1 m/s 25.1 m/s
Brake disk width K (+0 / -0.15 mm) 25
– 30 mm
25
– 30 mm
Nominal voltage U
N
see Type tag see Type tag
Overexcitation voltage U
O
2 x U
N
2 x U
N
Coil capacity at nominal voltage P
N
see Type tag see Type tag
Coil power at overexcitation P
O
4 x P
N
4 x P
N
Overexcitation time t
O
1
– 2 s
1
– 2 s
Max. air gap "a" (Fig. 2) after wear
1.8 mm 1.8 mm
Protection (electrical) IP54 IP54
Protection (mechanical) IP10 IP10
Duty cycle with 180 switchings per hour 60% 60%
Electrical connection of the magnetic coil 2 x 0.88 mm2 2 x 0.88 mm2
Electrical connection of the microswitch 3 x 0.5 mm
2
3 x 0.5 mm
2
Hand release force approx. 400 N approx. 400 N
Hand release stroke
> 3 mm > 3 mm
Tightening torque Item 5 10 Nm 10 Nm
Tightening torque Item 9 183 Nm 360 Nm
Tightening torque Item 10 710 Nm 710 Nm
Tightening torque Item 17
9 Nm 9 Nm
Tightening torque Item 20 9 Nm 9 Nm
Ambient temperature -5 °C to +40 °C -5 °C to +40 °C
Weight 54 kg 76 kg
DANGER
If the brake is operated with an air gap "a" > 1.8 mm, it becomes a safety risk as the braking effect is no longer given
because the armature disk (2) lies again the hand release (6).
1)
The thermal load for a brake cannot be stated. Most of the brake energy is transferred onto the brake disk.
The thermal load capability is dependent on the heat dissipation capacities of the brake disk.
Table 2: Dimensions
Size A B B1 C C1 E F G H M M1 N N1 T T1
1)
9 400 445 344 127 32 63.7 204 M24 94 75 45 75 33 53 31.5
10
430 474 360 129 52.5 50 204 M24 105 75 50 75 35 53 52
1)
The tolerance for dimension “T1” is ±2.5 mm.