Mayku Multiplier MMUA22100AA, Инструкция по установке и эксплуатации

Страница: 15 / 42

● Objects placed on the Multiplier bed may get hot.
● Regularly check the Multiplier power cord carefully for damage.
● Fully unwind the Multiplier mains cord before you plug it in the wall socket.
● Do not allow the Multiplier power cord to hang over sharp table edges or come into
contact with hot surfaces.
● Make sure that the Multiplier is switched off and remove the plug from the mains
electrical supply when it is not in use, before it is cleaned and while it is being repaired.
● Do not pull on the Multiplier power cord at any time.
● Do not use non-certified Mayku sheets and materials with your Multiplier.
● Only use Mayku branded air accessories with the Multiplier.
● Mayku are not responsible for the use of any experimental and potentially damaging
materials used as sheets or templates in the Multiplier.
● Keep the plate of your Multiplier clean by removing and washing in warm, soapy water.
● Keep your Multiplier clean by wiping down with a damp, non-abrasive cloth.
● Keep the bearings of your Multiplier lifting mechanism well maintained by applying
lubricating oil regularly to avoid wear.
● If handing the Multiplier over to a third party, ensure that this safety instruction manual is
supplied with the product.